# Soil Liquefaction Instructions

##

## 2. Parts List and Overview

Components List:

1. 1x Round 6 Quart Translucent Storage Container
2. 1x Black Waterproof Junction Box
3. 1x Type A to B Mini USB cable
4. 1x Fully Soldered PCB
5. Sample Structure

###

#### 2.1.1 Soldered PCB

###

## 3. Assembly

#### 3.1 Container

1\) Fill container a fourth of the way up with water.

2\) Insert PCB into the water vertically and hold it against the side of the container.

3\) Pour sand in container until water is covered and there is only dry sand.

4\) Put structure on top of sand, secure it from moving sideways.

5\) Plug in PCB connections.

6\) Start software

## 4. Experiment

1\) Once the software is running, start a run.

2\) Shake the container back and forth until  the structure sinks into the sand and the water table rises above the sand.

3\) Stop run, record data.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://mariah-brandon.gitbook.io/soil-liquifaction-manual/XitgxfzIAOCULyDqoF79/master.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.